Comptia A +: Hardware Display Devices MCQs

Comptia A +: Hardware Display Devices MCQs

These Comptia A +: Hardware Display Devices multiple-choice questions and their answers will help you strengthen your grip on the subject of Comptia A +: Hardware Display Devices. You can prepare for an upcoming exam or job interview with these 20 Comptia A +: Hardware Display Devices MCQs.
So scroll down and start answering.

1: The ____ indicates how quickly a pixel can go from black - to white - and back to black and is indicated in milliseconds (ms).

A.   Dynamic

B.   Perture grill

C.   1400 1050

D.   Response time

2: There are currently two methods used for the backlight - 1) ____ that is currently the most common backlight source and require an inverter to provide AC power to the backlight.

A.   DB-15

B.   D-sub connector

C.   CCFL (Cold Cathode Fluorescent Lamp)

D.   16:9

3: The smaller the dot pitch - the more room there is for____ resolutions and the ____ a picture may be.

A.   Brightness

B.   Y brightness

C.   Higher sharper

D.   1280x720 1920x1080

4: If you watch HDTV content (DVD movies) on a 16:10 monitor - the display will either be stretched slightly or have black bars (areas without video content) on the top and the bottom. If you want to optimize DVD viewing from your computer - consider pu

A.   Perture grill

B.   1152 864

C.   Worse

D.   16:9

5: If you watch HDTV content (DVD movies) on a 16:10 monitor - the display will either be stretched slightly or have black bars (areas without video content) on the top and bottom. If you want to optimize DVD viewing from your computer - consider pu

A.   DVI HDMI

B.   Widescreen

C.   16:9

D.   Splits the signal

A.   2048 1536

B.   Dual

C.   LED (Light Emitting Diode)

D.   D-sub

7: Common resolutions are often described using a naming standard - although these standards encompass much more than just resolution size. SXGA = ____ x ____ (5:4 aspect ratio).

A.   800 600

B.   1280 1024

C.   Brightness

D.   Resolution

8: Because of how the ____ monitor works - portions of the display tube cannot be used for displaying the image.

A.   CRT

B.   Widescreen

C.   640 480

D.   1600 1200

9: It is common for ____ monitors to support a wide number of resolutions - but LCD monitors often have a____ (optimum) display resolution.

A.   Widescreen

B.   1024 768

C.   CRT native

D.   640 480

A.   Dual

B.   Backlight

C.   CRT

D.   DVI-D (digital video-digital)

11: ____ and active matrix are additional terms that are often used to describe LCD monitors. Currently - all LDC displays are these kinds of displays.

A.   TFT (thin film transistor)

B.   CCFL (Cold Cathode Fluorescent Lamp)

C.   Single link

D.   720p 1080i

12: LCD monitors often include features for HDTV support such as built-in speakers and audio-out to ____ speakers. LCD monitors often include features for HDTV support such as an HDTV tuner to allow you to watch TV and change channels when the monitor is

A.   Analog output

B.   External

C.   Shadow mask

D.   S-video

13: The ____ indicates how quickly a pixel can go from black - to white - and back to black and is indicated milliseconds (ms).

A.   Aperture grill

B.   640 480

C.   Response time

D.   Single link

14: The magnetic field used for drawing the image on the screen can cause a buildup of magnetism on internal monitor components. This magnetic field can cause color distortions - especially around the edges. To correct this problem - use the ____ feature

A.   DVI-D (digital video-digital)

B.   Converter

C.   Analog CRT monitor

D.   Degauss

15: RT monitors use an electron beam that hits phosphor dots inside of a vacuum tube. While it is possible for a CRT monitor to have a digital connection - virtually all CRT monitors connect to the video card using a ____ (also called a D-sub) connector.

A.   Flat displays

B.   Video card

C.   DB-15

D.   Dead pixel

16: There are two methods of controlling the illumination of the phosphor - 2) an ____ consists of a screen of ultra thin vertical and horizontal wires. This configuration allows more electrons through resulting in a richer color display.

A.   1680 1050

B.   LCD

C.   Aperture grill

D.   Physical effective

17: The ____ identifies the angle at which the image can still be seen. With LCD monitors - the image will be dimmer and colors distorted when viewed from an angle. It is described with two numbers: horizontal angle and vertical angle - with a higher num

A.   Aspect ratio

B.   F-type

C.   Dual

D.   Viewing angle

18: Increasingly - the difference between an LCD monitor and an HDTV is being blurred. You can purchase an HDTV that can also function as a monitor - or a monitor that can function TV. Resolutions used by HDTV are: ____ and ____.

A.   Splits the signal

B.   Pixels

C.   1280x720 1920x1080

D.   DVI-I DVI-D

19: S-video (separate-video - Y/C - or S-VHS) connections are present on many video cards and supply ____ - video-only TV output.

A.   Analog

B.   1920 1080

C.   Y brightness

D.   Dynamic

20: Common resolutions are often described using a naming standard - although these standards encompass much more than just resolution size. SXGA+ = ____ x ____.

A.   1400 1050

B.   1280x720 1920x1080

C.   RCA

D.   Utilities

21: Most manufactures have started using a ____ measure of response time - which makes the response time faster than a white-to-black response time.

A.   G2G (grey-to-grey - or GTG)

B.   CRT

C.   6

D.   Interlacing

22: LCD monitors often include features for HDTV support such as support for ____ to watch copy-protected content.

A.   DVI-A (digital video-analog)

B.   External

C.   HDCP

D.   Dead

23: ____ (1280 x 720 progressive scan) and ____ (1920 x 1080 with interlacing) identify displays that do not support full HD content - with both 720p and 1080i being comparable in quality.

A.   TFT (thin film transistor)

B.   1400 1050

C.   CRT native

D.   720p 1080i

24: VA panels have ____ color reproduction and wider viewing angles than TN displays - but with slower response times and a higher cost.

A.   U V color

B.   Converter box

C.   Perture grill

D.   Better

25: ____ panels offer the best contrast ratios of the display types - and are well suited for movies that require good contrast.

A.   VA (Vertical Alignment)

B.   Dot pitch

C.   Shadow mask

D.   Laptop

26: There are ____ to identify and possibly fix dead pixels on a monitor.

A.   TV-tuner

B.   Response time

C.   Degauss

D.   Utilities

27: Resolutions with a W in the name are X____ resolutions with a 16:10 aspect ratio. In addition to these standard resolutions - you can also purchase monitors with the 16:9 aspect ratio used by HDTV content.

A.   Widescreen

B.   Interlacing

C.   Pixel pitch

D.   U V color